Ez-20 Battery Power Cable Cutting Tool
|FOB Price:||US $650 / Piece|
|Min. Order:||10 Pieces|
|Min. Order||FOB Price|
|10 Pieces||US $650/ Piece|
|Transport Package:||Plastic Box|
|Payment Terms:||L/C, T/T|
- Model NO.: EZ-20
- Rated Power: 52 MPa
- Cutting /Charge: 300 Times
- Rebar: 14mm
- Aluminum Wire: 20mm
- Trademark: ZUPPER
- Origin: Zhejiang
- Length: 116X75X382
- Max.Output: 50kn
- Package: Plastic Box
- Copper Stranded Wire: 20mm
- Armored Cable: 20mm
- Specification: ISO9001: 2000
- HS Code: 84672990
1. The hydraulic nuit incorporates an automatic retraction which returns the piston into its starting position when the maximum operating pressure is reached.
2. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston&die when the trigger is released.
3. The unit is equipped with a double piston pump which is characterised by a rapid approach of the dies forwards the connector and a slow crimping motion.
4. The crimping head can be smoothly turned by 350° Around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5. Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation the tool is always ready to operate. In addition we see a power weight ratio with 50% more
Capacity and shorter charging cycles compare to NiMH batteries.
6 A temperature sensor makes the tools stop working automatically when the temperature over 60º C under long time working, the fault signal sounds, it means the tool can't continue work until the temperature reduced to the normal.
|weight of tool||2.9kg|
|mild iron rod||13mm|
|copper stranded wire||20mm|
|voltage of battery||18V DC Li-ion|
|voltage of battery||100-240V AC|
|charging time||2 hours|
|sealing ring of cylinder||1set|
|sealing ring of safety valve||set|